????

Your IP : 3.149.24.115

Current Path : C:/Windows/System32/drivers/en-US/
Upload File :
Current File : C:/Windows/System32/drivers/en-US/i8042prt.sys.mui

MZ����@���	�!�L�!This program cannot be run in DOS mode.

$��<߱�R���R���R�U�����R�U�P���R�Rich��R�PEL�!(

PP[@  %8.rdata�@@.rsrc0 &@@�Jԙ
T88�Jԙ$��8.rdata8x.rdata$zzzdbg �.rsrc$01� @$.rsrc$02 �s����~�m����U7V�1��Ue�Jԙ��(�@�X�p�����	�	�	�� ���!���A��MUI������<��a��ȈEs0,]�OiA��yB'��d���MUIen-US@@�@@ @@0@ @@#@#@���L����D���!�!�$�'����	�
�
��`����"�"��(�)�\0�7��Some firmware configuration information was incomplete, so defaults were used.

�User configuration data is overriding firmware configuration data.

�The ring buffer that stores incoming keyboard data has overflowed (buffer size is configurable via the registry).

$The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the PS/2 mouse properties in device manager).

�Could not successfully write the Controller Command Byte for the i8042.

xAn unexpected ACKNOWLEDGE was received from the device.

No PS/2 compatible mouse device was detected on the PS/2 mouse port (not a problem unless this type of mouse really is connected).

�The PS/2 keyboard device does not exist or was not detected.

xAn unexpected RESET was detected from the mouse device.

dUnable to create the device map entry for %1.

dUnable to delete the device map entry for %1.

@The keyboard reset failed.

8The mouse reset failed.

�The device sent an incorrect response(s) following a keyboard reset.

�The device sent an incorrect response(s) following a mouse reset.

tCould not set the keyboard typematic rate and delay.

dCould not set the keyboard indicator lights.

�Could not tell the hardware to send keyboard scan codes in the set expected by the driver.

`Unable to create the symbolic link for %1.

pAn unexpected RESEND was received from the device.

�The keyboard and mouse devices do not exist or were not detected.

�An unexpected RESET was detected from the mouse device.  The wheel has been deactivated.

lA bogus RESET was detected from the mouse device.

�A wheel mouse was detected after a device reset. The wheel has been reactivated.

�A protocol error has occured. Resetting the mouse to known state.

�Not enough memory was available to allocate internal storage needed for the device %1.

�Not enough memory was available to allocate the ring buffer that holds incoming data for the PS/2 keyboard device. 

�The hardware locations for %1 could not be translated to something the memory management system understands.

�The hardware resources for %1 are already in use by another device.

�Could not connect the interrupt for the PS/2 keyboard device. 

�The ISR has detected an internal state error in the driver for the PS/2 keyboard device. 

�The Start I/O procedure has detected an internal error in the driver for the PS/2 keyboard device.

�The Initiate I/O procedure has detected an internal state error in the driver for the PS/2 keyboard device.

TCould not set the mouse sample rate.

PCould not set the mouse resolution.

hCould not enable transmissions from the mouse.

�Exceeded the allowable number of retries (configurable via the registry) for the PS/2 keyboard device.

�The operation on the PS/2 keyboard device timed out (time out is configurable via the registry).

�An error occurred while trying to determine the number of mouse buttons.

�An error occurred while trying to acquire the device ID of the mouse

 An error occurred while enabling the mouse to transmit information.  The device has been reset in an attempt to make the device functional.

�Not enough memory was available to allocate the ring buffer that holds incoming data for the PS/2 pointing device.

�Could not connect the interrupt for the PS/2 pointing device.

�The ISR has detected an internal state error in the driver for the PS/2 pointing device.

�The Start I/O procedure has detected an internal error in the driver for the PS/2 pointing device.

�The Initiate I/O procedure has detected an internal state error in the driver for the PS/2 pointing device.

�Exceeded the allowable number of retries (configurable via the registry) for the PS/2 pointing device. 

�The operation on the PS/2 pointing device timed out (time out is configurable via the registry).

\Could not attach to the PnP device stack.

�4VS_VERSION_INFO��
|O
|O?�StringFileInfo�040904B0LCompanyNameMicrosoft CorporationLFileDescriptioni8042 Port Driverh$FileVersion10.0.20348.1 (WinBuild.160101.0800):
InternalNamei8042prt.sys�.LegalCopyright� Microsoft Corporation. All rights reserved.JOriginalFilenamei8042prt.sys.muij%ProductNameMicrosoft� Windows� Operating System>
ProductVersion10.0.20348.1DVarFileInfo$Translation	�PADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDING